Alkali Resistant Fiberglass Mesh is a type of reinforcing material commonly used in construction. It is made from fiberglass fibers that are coated with a special alkaline-resistant polymer. This coating provides the mesh with resistance to the corrosive effects of alkali substances, such as cement and concrete, which are commonly used in building materials.

The primary purpose of using alkali resistant fiberglass mesh in construction is to reinforce surfaces and prevent cracking, especially in areas prone to expansion and contraction, such as walls, ceilings, and floors. When embedded in cement or concrete, the fiber glass mesh enhances the material's tensile strength and prevents the formation of cracks caused by thermal changes, shrinkage, or structural movement.

Processing of Fiberglass Mesh

Fiberglass mesh is a kind of alkali-resistant fiberglass fabric, it is made of the C or E glass fiber yarn, through a special weaving technique, then coated by the antialkali and reinforcing agent and treated by high temperature heat finishing.

Properties

Alkali resistant fiberglass mesh owns high strength, good cohesion and can well combine with EPS board firmly, it features non alkaline, stress resistance, impact resistance and flame retardant.

Alkali Resistant Fiberglasss Mesh is supplied in Tapes and Mesh Rolls:

Fiberglass Mesh Tape

Vinyl coated fiber mesh tapes enable casts and mother molds to work with thin fabrics without sacrificing strength. Black silicone coated fiberglass mesh is also available. Fiberglass reinforcing mesh is used in tape form or cut to pieces as mesh wing fabrics attached to plastering corner beads.

Fiberglass Mesh Reinforcement is a coated alkaline resistant fiberglass fabric used for stucco system and rendering concrete wall. Fiberglass mesh has several advantages over welded mesh in stucco netting uses. It has high tensile strength, water-proof, low elongation, it is an ideal material for concrete reinforcing in building EIFS system, interior and exterior wall insulation system, H forms system for the drywall plastering and reinforcing.

Fiberglass mesh is an ideal material for building engineering. It is widely used for waterproofing in roofing applications, and Exterior Insulation Finishing System(EIFS), also known as EIFS mesh. EIFS mesh is made from fiberglass woven mesh as its basic material, then treated by alkali-resistant macromolecule latex.

A/R (alkaline resistant) coated fiberglass mesh is mainly used in reinforcing concretes and any alkaline base medium. It is waterproof membrane fabric with high tensile strength. Also known as EIFS mesh applied to exterior thermal insulation system, or stucco mesh in cement coat finishes.

EIFS Wall Insulation Mesh Tapes Water Proof for Concrete Wall Thermal Insulation and Finishes:
Fiberglass fabric for EIFS mesh is coated by the anti-alkali and reinforcing agent and treated by high temperature heat finishing. It is ideal engineering material in construction and decoration of buildings. EIFS mesh tape can keep the heat and guarantee the insulation surface and flat finishes of wall.

Typical specifications include:
160g/m2 5mmx5mm Alkali Resistant Colored Fiberglass Mesh Cloth;
5mm*5mm 150g/m2 wall reinforcing fiberglass mesh;
75gr 100gr 125gr 145gr 160gr 4x4 5x5 alkali resistant plaster fiberglass mesh;
110g-5x5 roofing alkali resistant fiberglass mesh;
145g 5x5mm color alkali resistant fiberglass mesh.

Weaving Methods: Fberglass mesh includes plain weave fiberglass mesh and twill fiberglass mesh.

4x4mm alkali resistant fiberglass mesh rolls

Alkali resistant 6x6 105g reinforcement base fiberglass mesh

Alkali resistant fiberglass mesh water proofing

75g alkali-resistant reinforced EIFS fiberglass mesh

Alkali resistant concrete reinforcement fiberglass mesh tape